Today I'd like to give you a quick overview of the modern fuel system. It starts with the fuel tank. The fuel pump is located inside the tank and pumps fuel out to the engine. Somewhere along the way is a fuel filter, whose job is to filter out dirt before it gets into the engine. Then there's the fuel intake system and the fuel injectors that deliver the fuel to be burned in the engine. Now, let's focus on how to make the various components of your fuel system work well and last as long as possible. The best thing you can do for your fuel pump is to use good, quality fuel. Top-tier gas typically has fewer contaminants and more detergents, to keep things clean. Using good gas or adding a fuel system cleaner to your tank can prolong the life of your fuel pump. Because the fuel pump lives inside your tank, it's pretty expensive to replace. Helping it last as long as possible is a worthwhile goal. The fuel filter is often called the forgotten filter, but it plays a vital role in how your engine runs. It catches dirt and contaminants. When it's clogged, your engine may not be able to get enough fuel and could sputter. Many fuel filters have a bypass valve that allows unfiltered fuel to pass when the filter is clogged. That prevents your engine from dying while you're driving, but it can't protect your engine from dirty fuel. Check your owners manual or speak with your Elite Service Advisor about how often you should replace your fuel filter. Additionally, fuel will cause gum and varnish to build up in the fuel intake system. A professional fuel system cleaning will remove the gunk to keep fuel flowing freely and help prevent contamination from reaching your fuel injectors and your engine. Fuel injectors spray fuel into the engine. The fuel must be delivered in a precise amount, at a precise time, under precise pressure and in a precise pattern. Pressure can range from 45 pounds per square inch to 45,000 pounds per square inch, depending on the engine. As you may guess, fuel injectors cost a lot. Allowing them to get gummed up will not only hurt your performance and fuel economy, it will cause the injectors to wear out much more quickly than they should. A professional fuel system cleaning will keep injectors clean and working correctly. It will also clean deposits from the inside of the combustion chamber and off the intake valves, giving you optimum performance and mileage. Check with your service advisor and see when he/she recommends you get a fuel system cleaning based on your model of car and driving habits.
Book An Appointment